SEARCH NOW FOR ALL YOUR MINICUT INTERNATIONAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
Sorting/Paging
MINICUT INTERNATIONAL
0930PM-4020
1-1/4" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€457.01
Buy Surplus As Low As
€274.77
€274.77
MINICUT INTERNATIONAL
0930PM-1630
1/2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 5" OAL, 1/2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€192.62
Buy Surplus As Low As
€116.14
€116.14
MINICUT INTERNATIONAL
0930PM-2818
7/8" DIAM, 1-7/8" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-1/8" OAL, 7/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€264.39
Buy Surplus As Low As
€158.63
€158.63
MINICUT INTERNATIONAL
0930PM-2850
7/8" DIAM, 5" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 7-1/4" OAL, 7/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€476.84
Buy Surplus As Low As
€286.10
€286.10
MINICUT INTERNATIONAL
930-6430-40
2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€664.74
Buy Surplus As Low As
€399.41
€399.41
MINICUT INTERNATIONAL
930-4830OLD
1-1/2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€408.85
Buy Surplus As Low As
€245.50
€245.50
MINICUT INTERNATIONAL
0930PM-4030
1-1/4" DIAM, 3" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€556.15
Buy Surplus As Low As
€334.26
€334.26
MINICUT INTERNATIONAL
0930PM-3260
1" DIAM, 6" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 8-1/2" OAL, 1" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€592.03
Buy Surplus As Low As
€355.98
€355.98
MINICUT INTERNATIONAL
930P-2818
7/8" DIAM, 1-7/8" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 4-1/8" OAL, 7/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€219.06
Buy Surplus As Low As
€132.19
€132.19
MINICUT INTERNATIONAL
930-6430
2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 6-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€664.74
Buy Surplus As Low As
€399.41
€399.41
MINICUT INTERNATIONAL
930P-4830
1-1/2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€492.89
Buy Surplus As Low As
€296.49
€296.49
MINICUT INTERNATIONAL
930-4060
1-1/4" DIAM, 6" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 8-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€507.05
Buy Surplus As Low As
€304.99
€304.99
MINICUT INTERNATIONAL
930P-3260
1" DIAM, 6" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 8-1/2" OAL, 1" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€491.00
Buy Surplus As Low As
€294.60
€294.60
MINICUT INTERNATIONAL
930P-6430
2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 6-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€773.33
Buy Surplus As Low As
€464.56
€464.56
MINICUT INTERNATIONAL
930P-6480
2" DIAM, 8" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 11-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€1,275.66
Buy Surplus As Low As
€765.77
€765.77
MINICUT INTERNATIONAL
0930-2835
7/8" DIAM, 3-1/2" LOC, 3 FLUTE COBALT CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-3/4" OAL, 7/8" SHANK DIAM, SINGLE END, 43.5° HELIX
€224.73
Buy Surplus As Low As
€135.03
€135.03
MINICUT INTERNATIONAL
0930PM-1620
1/2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 4" OAL, 1/2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€162.41
Buy Surplus As Low As
€98.20
€98.20
MINICUT INTERNATIONAL
0930PM-1208
3/8" DIAM, 3/4" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 2-1/2" OAL, 3/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€113.31
Buy Surplus As Low As
€67.98
€67.98
MINICUT INTERNATIONAL
0930P-1630
1/2" DIAM, 3" LOC, 3 FLUTE COBALT CORNER CHAMFER ROUGHING END MILL UNCOATED, 5" OAL, 1/2" SHANK DIAM, SINGLE END, 43.5° HELIX
€168.07
Buy Surplus As Low As
€101.03
€101.03
MINICUT INTERNATIONAL
0930PM-2440
3/4" DIAM, 4" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 6-1/4" OAL, 3/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€308.76
Buy Surplus As Low As
€186.01
€186.01
MINICUT INTERNATIONAL
0930PM-4040
1-1/4" DIAM, 4" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 6-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€655.30
Buy Surplus As Low As
€393.75
€393.75
MINICUT INTERNATIONAL
0930PM-3220
1" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-1/2" OAL, 1" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€319.15
Buy Surplus As Low As
€191.68
€191.68
MINICUT INTERNATIONAL
0930PM-2835
7/8" DIAM, 3-1/2" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-3/4" OAL, 7/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€361.64
Buy Surplus As Low As
€217.17
€217.17
MINICUT INTERNATIONAL
0930PM-3230
1" DIAM, 3" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€414.52
Buy Surplus As Low As
€249.28
€249.28
MINICUT INTERNATIONAL
930-6440-40
2" DIAM, 4" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 6-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€748.78
Buy Surplus As Low As
€449.45
€449.45
MINICUT INTERNATIONAL
930-6420-40
2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€613.75
Buy Surplus As Low As
€368.25
€368.25
MINICUT INTERNATIONAL
930-6440
2" DIAM, 4" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 7-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€748.78
Buy Surplus As Low As
€449.45
€449.45
MINICUT INTERNATIONAL
0930PM-4060
1-1/4" DIAM, 6" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 8-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€854.53
Buy Surplus As Low As
€512.72
€512.72
MINICUT INTERNATIONAL
930P-4840
1-1/2" DIAM, 4" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 6-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€575.04
Buy Surplus As Low As
€345.59
€345.59
MINICUT INTERNATIONAL
930P-6460
2" DIAM, 6" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 9-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€1,079.26
Buy Surplus As Low As
€647.74
€647.74
MINICUT INTERNATIONAL
930-6480
2" DIAM, 8" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 11-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€1,095.31
Buy Surplus As Low As
€657.19
€657.19
MINICUT INTERNATIONAL
930P-4060
1-1/4" DIAM, 6" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 8-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€655.30
Buy Surplus As Low As
€393.75
€393.75
MINICUT INTERNATIONAL
930P-6440
2" DIAM, 4" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 7-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€920.63
Buy Surplus As Low As
€552.38
€552.38
MINICUT INTERNATIONAL
985-2016
5/8", 1-5/8" LOC, 5/8" SHANK DIAM, 3-3/4" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€177.52
Buy Surplus As Low As
€106.70
€106.70
MINICUT INTERNATIONAL
930P-4820
1-1/2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€419.24
Buy Surplus As Low As
€252.11
€252.11
MINICUT INTERNATIONAL
930P-6420-40
2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€795.99
Buy Surplus As Low As
€477.78
€477.78
MINICUT INTERNATIONAL
985-4060
1-1/4", 6" LOC, 1-1/4" SHANK DIAM, 8-1/2" OAL, 4 FLUTE, HIGH SPEED STEEL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, SERIES 985
€705.34
Buy Surplus As Low As
€423.96
€423.96
MINICUT INTERNATIONAL
985-4030-A
1-1/4", 3" LOC, 1-1/4" SHANK DIAM, 5-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€519.33
Buy Surplus As Low As
€311.60
€311.60
MINICUT INTERNATIONAL
985-1213
3/8", 1-3/8" LOC, 3/8" SHANK DIAM, 3-1/8" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€177.52
Buy Surplus As Low As
€106.70
€106.70
MINICUT INTERNATIONAL
985-3220
1", 2" LOC, 1" SHANK DIAM, 4-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€293.66
Buy Surplus As Low As
€176.57
€176.57
MINICUT INTERNATIONAL
995-2025
5/8", 2-1/2" LOC, 5/8" SHANK DIAM, 4-5/8" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€235.11
Buy Surplus As Low As
€141.64
€141.64
MINICUT INTERNATIONAL
985-3230-A
1", 3" LOC, 1" SHANK DIAM, 5-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€432.46
Buy Surplus As Low As
€259.66
€259.66
MINICUT INTERNATIONAL
985-3240-A
1", 4" LOC, 1" SHANK DIAM, 6-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€495.72
Buy Surplus As Low As
€297.43
€297.43
MINICUT INTERNATIONAL
995-3240A
1", 4" LOC, 1" SHANK DIAM, 6-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€505.16
Buy Surplus As Low As
€303.10
€303.10
MINICUT INTERNATIONAL
BNSI-1000TCP30
CARBIDE MILLING INSERT, BNSI 1.00 P30 TICN, TICN FINISH, 1.455" LONG X 0.236INCH THICK
€159.58
Buy Surplus As Low As
€96.31
€96.31
MINICUT INTERNATIONAL
930P-4020
1-1/4" DIAM, 2" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€346.53
Buy Surplus As Low As
€208.68
€208.68
MINICUT INTERNATIONAL
930P-4860
1-1/2" DIAM, 6" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 8-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€758.22
Buy Surplus As Low As
€455.12
€455.12
MINICUT INTERNATIONAL
985-4020-A
1-1/4", 2" LOC, 1-1/4" SHANK DIAM, 4-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€431.51
Buy Surplus As Low As
€259.66
€259.66
MINICUT INTERNATIONAL
985-2430
3/4", 3" LOC, 3/4" SHANK DIAM, 5-1/4" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€280.44
Buy Surplus As Low As
€169.02
€169.02
MINICUT INTERNATIONAL
985-1208
3/8", 3/4" LOC, 3/8" SHANK DIAM, 2-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 98 ...
€149.19
Buy Surplus As Low As
€89.70
€89.70