SEARCH NOW FOR ALL YOUR MINICUT INTERNATIONAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
Sorting/Paging
MINICUT INTERNATIONAL
930P-6430-40
2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL ROUGHING SQUARE END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€773.33
Buy Surplus As Low As
€464.56
€464.56
MINICUT INTERNATIONAL
995-3230
1", 3" LOC, 1" SHANK DIAM, 5-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€361.64
Buy Surplus As Low As
€217.17
€217.17
MINICUT INTERNATIONAL
995-1208
3/8", 3/4" LOC, 3/8" SHANK DIAM, 2-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 99 ...
€149.19
Buy Surplus As Low As
€89.70
€89.70
MINICUT INTERNATIONAL
985-3230
1", 3" LOC, 1" SHANK DIAM, 5-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€379.58
Buy Surplus As Low As
€228.50
€228.50
MINICUT INTERNATIONAL
985-3220-A
1", 2" LOC, 1" SHANK DIAM, 4-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€331.43
Buy Surplus As Low As
€199.23
€199.23
MINICUT INTERNATIONAL
995-3230AOLD
1", 3" LOC, 1" SHANK DIAM, 5-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€436.24
Buy Surplus As Low As
€262.50
€262.50
MINICUT INTERNATIONAL
BNMI-3275-32SN
1" CUT DIAM, 0.642" MAX DEPTH OF CUT, 1" SHANK DIAM, 7" OAL, INDEXABLE BALL NOSE END MILL 2-3/4" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 1000 INSERT
€723.28
Buy Surplus As Low As
€434.35
€434.35
MINICUT INTERNATIONAL
985-4040
1-1/4", 4" LOC, 1-1/4" SHANK DIAM, 6-1/2" OAL, 4 FLUTE, HIGH SPEED STEEL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, SERIES 985
€549.54
Buy Surplus As Low As
€330.48
€330.48
MINICUT INTERNATIONAL
985-3260-A
1", 6" LOC, 1" SHANK DIAM, 8-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 985
€639.25
Buy Surplus As Low As
€384.30
€384.30
MINICUT INTERNATIONAL
BNMI-1235-16SN
3/8" CUT DIAM, 0.26" MAX DEPTH OF CUT, 1/2" SHANK DIAM, 3.55" OAL, INDEXABLE BALL NOSE END MILL 1.344" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0375 INSERT
€434.35
Buy Surplus As Low As
€260.61
€260.61
MINICUT INTERNATIONAL
985-4040-A
1-1/4", 4" LOC, 1-1/4" SHANK DIAM, 6-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€610.92
Buy Surplus As Low As
€367.31
€367.31
MINICUT INTERNATIONAL
995-1213
3/8", 1-3/8" LOC, 3/8" SHANK DIAM, 3-1/8" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€178.46
Buy Surplus As Low As
€107.64
€107.64
MINICUT INTERNATIONAL
BNMI-1658-16SN
1/2" CUT DIAM, 3/8" MAX DEPTH OF CUT, 1/2" SHANK DIAM, 5" OAL, INDEXABLE BALL NOSE END MILL 1.812" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0500 INSERT
€496.67
Buy Surplus As Low As
€298.38
€298.38
MINICUT INTERNATIONAL
RPM-2016
5/8" DIAM, 1-5/8" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 3-3/4" OAL, 5/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€291.77
Buy Surplus As Low As
€175.63
€175.63
MINICUT INTERNATIONAL
995-2430
3/4", 3" LOC, 3/4" SHANK DIAM, 5-1/4" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€311.60
Buy Surplus As Low As
€186.96
€186.96
MINICUT INTERNATIONAL
BNMI-1635-16SN
1/2" CUT DIAM, 3/8" MAX DEPTH OF CUT, 1/2" SHANK DIAM, 3.55" OAL, INDEXABLE BALL NOSE END MILL 1-1/4" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0500 INSERT
€434.35
Buy Surplus As Low As
€260.61
€260.61
MINICUT INTERNATIONAL
BNMI-2462-24SN
3/4" CUT DIAM, 0.512" MAX DEPTH OF CUT, 3/4" SHANK DIAM, 6" OAL, INDEXABLE BALL NOSE END MILL 1-3/4" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0750 INSERT
€509.89
Buy Surplus As Low As
€305.93
€305.93
MINICUT INTERNATIONAL
BNMI-2445-24SN
3/4" CUT DIAM, 0.512" MAX DEPTH OF CUT, 3/4" SHANK DIAM, 4" OAL, INDEXABLE BALL NOSE END MILL 1-3/4" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0750 INSERT
€472.12
Buy Surplus As Low As
€283.27
€283.27
MINICUT INTERNATIONAL
BNMI-2055-20SN
5/8" CUT DIAM, 0.394" MAX DEPTH OF CUT, 5/8" SHANK DIAM, 5" OAL, INDEXABLE BALL NOSE END MILL 1-3/8" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0625 INSERT
€575.04
Buy Surplus As Low As
€345.59
€345.59
MINICUT INTERNATIONAL
BNSI-0625SUK20
CARBIDE MILLING INSERT, BNSI .625 K20 TIALNSUP, TIALN FINISH, 0.94" LONG X 0.157INCH THICK
€111.42
Buy Surplus As Low As
€67.04
€67.04
MINICUT INTERNATIONAL
RPM-TC-1210
3/8" DIAM, 1" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL TICN FINISH, 2-3/4" OAL, 3/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€189.79
Buy Surplus As Low As
€114.25
€114.25
MINICUT INTERNATIONAL
BNMI-2475-32TN
3/4" CUT DIAM, 0.512" MAX DEPTH OF CUT, 1" SHANK DIAM, 7" OAL, INDEXABLE BALL NOSE END MILL 3" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0750 INSERT
€643.02
Buy Surplus As Low As
€386.19
€386.19
MINICUT INTERNATIONAL
BNMI-3290-32SN
1" CUT DIAM, 0.642" MAX DEPTH OF CUT, 1" SHANK DIAM, 9.062" OAL, INDEXABLE BALL NOSE END MILL 3-1/8" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 1000 INSERT
€781.82
Buy Surplus As Low As
€469.28
€469.28
MINICUT INTERNATIONAL
BNSI-1000SUP30
CARBIDE MILLING INSERT, BNSI 1.00 P30 TIALNSUP, TIALN FINISH, 1.455" LONG X 0.236INCH THICK
€162.41
Buy Surplus As Low As
€98.20
€98.20
MINICUT INTERNATIONAL
RPM-TC-3220
1" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL TICN FINISH, 4-1/2" OAL, 1" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€502.33
Buy Surplus As Low As
€302.15
€302.15
MINICUT INTERNATIONAL
RPM-1210
3/8" DIAM, 1" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 2-3/4" OAL, 3/8" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€163.35
Buy Surplus As Low As
€98.20
€98.20
MINICUT INTERNATIONAL
985-4060A
1-1/4", 6" LOC, 1-1/4" SHANK DIAM, 8-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES ...
€783.71
Buy Surplus As Low As
€470.23
€470.23
MINICUT INTERNATIONAL
995-3220A
1", 2" LOC, 1" SHANK DIAM, 4-1/2" OAL, 6 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€333.31
Buy Surplus As Low As
€200.18
€200.18
MINICUT INTERNATIONAL
BNMI-2063-20SN
5/8" CUT DIAM, 0.394" MAX DEPTH OF CUT, 5/8" SHANK DIAM, 6" OAL, INDEXABLE BALL NOSE END MILL 2" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0625 INSERT
€586.37
Buy Surplus As Low As
€352.20
€352.20
MINICUT INTERNATIONAL
RPM-2425
3/4" DIAM, 2-1/2" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-3/4" OAL, 3/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€384.30
Buy Surplus As Low As
€231.34
€231.34
MINICUT INTERNATIONAL
995-3240
1", 4" LOC, 1" SHANK DIAM, 6-1/2" OAL, 4 FLUTE, POWDERED METAL SQUARE END MILL SINGLE END, UNCOATED, SPIRAL FLUTE, 35° HELIX, CENTERCUTTING, RIGHT HAND CUT, RIGHT HAND FLUTE, SERIES 995
€436.24
Buy Surplus As Low As
€262.50
€262.50
MINICUT INTERNATIONAL
BNMI-1663-20TN
1/2" CUT DIAM, 3/8" MAX DEPTH OF CUT, 5/8" SHANK DIAM, 6" OAL, INDEXABLE BALL NOSE END MILL 2.312" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0500 INSERT
€516.50
Buy Surplus As Low As
€310.65
€310.65
MINICUT INTERNATIONAL
BNSI-0500SUK10
CARBIDE MILLING INSERT, BNSI .500 K10 TIALNSUP, TIALN FINISH, 3/4" LONG X 0.118INCH THICK
€100.09
Buy Surplus As Low As
€60.43
€60.43
MINICUT INTERNATIONAL
RPM-6430-40
2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€1,278.49
Buy Surplus As Low As
€767.66
€767.66
MINICUT INTERNATIONAL
BNMI-2467-24SN
3/4" CUT DIAM, 0.512" MAX DEPTH OF CUT, 3/4" SHANK DIAM, 6" OAL, INDEXABLE BALL NOSE END MILL 2-3/8" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 0750 INSERT
€516.50
Buy Surplus As Low As
€310.65
€310.65
MINICUT INTERNATIONAL
BNMI-3262-32SN
1" CUT DIAM, 0.642" MAX DEPTH OF CUT, 1" SHANK DIAM, 6" OAL, INDEXABLE BALL NOSE END MILL 1-3/4" HEAD LENGTH, STRAIGHT SHANK, BNMI TOOLHOLDER, BNSI 1000 INSERT
€692.12
Buy Surplus As Low As
€415.46
€415.46
MINICUT INTERNATIONAL
BNSI-1000SUK10
CARBIDE MILLING INSERT, BNSI 1.00 K10 TIALNSUP, TIALN FINISH, 1.455" LONG X 0.236INCH THICK
€162.41
Buy Surplus As Low As
€98.20
€98.20
MINICUT INTERNATIONAL
RPM-TC-1620
1/2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL TICN FINISH, 4" OAL, 1/2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€320.10
Buy Surplus As Low As
€192.62
€192.62
MINICUT INTERNATIONAL
BNSI-0375TCK20
CARBIDE MILLING INSERT, BNSI .375 K20 TICN, TICN FINISH, 0.52" LONG X 0.118INCH THICK
€92.53
Buy Surplus As Low As
€55.71
€55.71
MINICUT INTERNATIONAL
BNSI-0500SUP30O
CARBIDE MILLING INSERT, BNSI .500 P30 TIALNSUP, TIALN FINISH, 3/4" LONG X 0.118INCH THICK
€100.09
Buy Surplus As Low As
€60.43
€60.43
MINICUT INTERNATIONAL
BNSI-1000TCK10
CARBIDE MILLING INSERT, BNSI 1.00 K10 TICN, TICN FINISH, 1.455" LONG X 0.236INCH THICK
€159.58
Buy Surplus As Low As
€96.31
€96.31
MINICUT INTERNATIONAL
BNSI-0625TCK20
CARBIDE MILLING INSERT, BNSI .625 K20 TICN, TICN FINISH, 0.94" LONG X 0.157INCH THICK
€109.53
Buy Surplus As Low As
€66.10
€66.10
MINICUT INTERNATIONAL
BNSI-0500TCK20
CARBIDE MILLING INSERT, BNSI .500 K20 TICN, TICN FINISH, 3/4" LONG X 0.118INCH THICK
€98.20
Buy Surplus As Low As
€59.49
€59.49
MINICUT INTERNATIONAL
BNSI-1250SUK20
CARBIDE MILLING INSERT, BNSI 1.25 K20 TIALNSUP, TIALN FINISH, 1.87" LONG X 0.276INCH THICK
€210.56
Buy Surplus As Low As
€126.53
€126.53
MINICUT INTERNATIONAL
RPM-TC-6420
2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL 45° CORNER CHAMFER ROUGHING END MILL TICN FINISH, 5-3/4" OAL, 2" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€1,474.89
Buy Surplus As Low As
€885.69
€885.69
MINICUT INTERNATIONAL
RPM-2416
3/4" DIAM, 1-5/8" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 3-7/8" OAL, 3/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€327.65
Buy Surplus As Low As
€197.34
€197.34
MINICUT INTERNATIONAL
RPM-4820
1-1/2" DIAM, 2" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 4-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€654.35
Buy Surplus As Low As
€392.80
€392.80
MINICUT INTERNATIONAL
RPM-2430
3/4" DIAM, 3" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/4" OAL, 3/4" SHANK DIAM, CENTERCUTTING, 43.5° HELIX
€330.48
Buy Surplus As Low As
€198.29
€198.29
MINICUT INTERNATIONAL
SF930-2835
7/8" DIAM 3 FLUTE POWDERED METAL CORNER CHAMFER END MILL UNCOATED, 5-3/4" OAL, 3-1/2" LOC, 7/8" SHANK DIAM, 43.50° HELIX, RH CUT, RH FLUTE
€340.87
Buy Surplus As Low As
€204.90
€204.90
MINICUT INTERNATIONAL
RPM-4830
1-1/2" DIAM, 3" LOC, 3 FLUTE POWDERED METAL CORNER CHAMFER ROUGHING END MILL UNCOATED, 5-1/2" OAL, 1-1/4" SHANK DIAM, SINGLE END, CENTERCUTTING, 43.5° HELIX
€771.44
Buy Surplus As Low As
€463.62
€463.62